LC200N (Z-FiNit) knife steel
LC200N (Z-FiNit) is a stainless knife steel, typically hardened to HRC 57-60.
| Type | Stainless |
|---|---|
| Hardness | HRC 57-60 |
| Edge retention | highhigher than 19 of 48, tied with 17 |
| Corrosion resistance | extremehigher than 46 of 48, tied with 2 |
| Toughness | highhigher than 25 of 48, tied with 14 |
| Ease of sharpening | moderate to sharpeneasier to sharpen than 20 of 48, tied with 14 |
| Price tier | Premium |
| Best for | KitchenOutdoor / bushcraftEDC / folders |
LC200N (Z-FiNit) chemical composition
| C | Cr | Mo |
|---|---|---|
| 0.3 | 15 | 1 |
Nominal weight %. Source: Zapp LC 200 N datasheet.
Knives in LC200N (Z-FiNit)
We have not picked a LC200N (Z-FiNit) knife to show here yet. The link below searches Amazon for LC200N (Z-FiNit) knives as listed today.
Shop LC200N (Z-FiNit) knives on Amazon →
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you — the link opens Amazon results for knives in this steel.
Similar stainless steels
| Steel | Type | HRC | Edge | Corrosion | Toughness | Tier | Buy |
|---|---|---|---|---|---|---|---|
| 440C | Stainless | 58-60 | medium | high | medium | Budget | Shop → |
| 8Cr13MoV | Stainless | 57-59 | medium | medium | medium | Budget | Shop → |
| 9Cr18MoV | Stainless | 58-60 | medium | high | medium | Budget | Shop → |
| AUS-8 | Stainless | 57-59 | medium | medium | high | Budget | Shop → |
| Sandvik 12C27 | Stainless | 57-59 | medium | high | high | Budget | Shop → |
| AUS-10 | Stainless | 58-60 | medium | medium | medium | Mid | Shop → |